Inserting Memory Card - Auerswald COMmander Basic.2 Installation And Commissioning Instructions

Preparation (Modules)
Caution: In factory settings, the COMmander VMF
module is already equipped with a memory card.
Your only have to exchange the memory card in case
it is damaged.
Removing the memory card from the PBX during
operation is not permitted.
Casing variants for wall mounting: Pull out the
power plug of the PBX before commissioning a
skilled electrician to open the casing to install the
expansion module or perform switching or con-
necting services.
19" casing variants: The Power button switches
the voltage at the module expansion slots and on
the main circuit board off. If the system is switched
off, a skilled electrician can be commissioned to
replace or install expansion modules.
When installing or replacing a module, only touch
the fixing components of the front plate where
necessary. Do not insert any electrically conduc-
tive objects into the casing, since hazardous vol-
tages continue to apply in the power supply unit of
the system.
Steps to Take
1.
Insert the memory card with the contacts directed up-
wardly first into the SD card slot of the COMmander
VMF Module.
2.
To be able to use the memory card for the voice mail
and fax function, you need to format it via the PBX.
Note: If you would like to remove the memory card,
you can unlock it by pressing lightly on the slot.
It is recommended to replace the memory card every
two years. Use only recommended boards (see
Service/Support > FAQs > FAQs: Memory cards
for the COMmander
www.auerswald.de).
24

Inserting Memory Card

VMF module at