Table of Contents
Advertisement
Transfer a Call with prior Notice
g (F)
conversation
(ignore with
(No. 1)
pulse dial)
or
or
g (F) n
conversation
(ignore with
(No. 1)
pulse dial)
You can only transfer an external call to another external calling
partner this way if the necessary permission for exchange line
to exchange line switching was configured for your telephone with the
configuration program COMset (this does not apply to an external call
made via an analog VoIP/GSM adapter).
A transferred call between external calling partners is limited to a period
configured with the configuration program (this does not apply to an
external call made via an analog VoIP/GSM adapter). This is for your
Transfer external Call without Announcement to an internal Telephone (Blind Transfer)
g (F)
external con-
(ignore with
versation
pulse dial)
If the called subscriber does not pick up (the ringing duration
may be configured for analog destination subscribers via con-
figuration program COMset), the call will return to your own telephone
after 60 seconds (your telephone rings). If you are not picking up this
Transfer an external Call to a currently unknown internal Target (Open Query)
g (F) n
(ignore
external con-
internal telephone number
within pulse
versation
configured for „Open query"
dial)
b f (**)
internal
(for Direct Exchange
dial tone
Line Telephone only)
To perform the „Open query", an internal telephone number has to be
configured for an unused analog port. This way the connection of an
analog telephone is no possible at this port. If two or more „Open Que-
0 r
Exchange Line Access Number and external
number
k
Short-Code Dial Number
Z r
Exchange Line Access Number for the 1st to
4th S
port and external telephone number
0
g
internal number of
internal Query call
a telephone
(No. 2)
n
f a
internal number
wait for ring-
e.g. 33
ing tone
f a
wait for
ringing tone
6 n
6 and internal telephone
number configured for „Open
Query"
g
a
external Query
hang up
call (No. 2)
a
Start internal Query call and connect both calling partners by
hang up
security because e.g. the unintentional transfer to the speaking-clock
announcement and the weather forecast service would lead to a never
ending call.
I
For some ISDN telephones the „Transfer" can be executed
via an existing function key or via menu instead of hanging up
the receiver (see manual of the telephone; perhaps it is also called
„ECT" or „Transfer").
hang up – if the called subscriber is picking
up, he is connected with the external caller
call within 60 additional seconds the call will be disconnected. If your
own telephone is busy in that moment, the procedure will be finished
already after the first 60 seconds and the external call will be discon-
nected.
inform the requested call partner
hang up
(e. g. via loudspeaker)
g
conversation
ries" have to be possible at the same time, more internal telephone
numbers have to be configured.
Telephoning
Start external Query call and connect both
calling partners by hanging up
Start external Query call with Short-Code
dialling and connect both calling partners
by hanging up
Start external Query call via 1st to 4th
exchange line and connect both calling
partners by hanging up (COMpact
4410 USB and COMmander Basic only)
Start internal call and hang up to
transfer an external call
Start Open Query and hang up to
transfer the external call
Accept Open Query call with Pickup
17
hanging up
Advertisement
Table of Contents
