Table of Contents
Advertisement
PBX Time
The PBX has an internal clock that returns the PBX time (time and date) on
the connected end devices. If the end device is so equipped, the PBX time
will be displayed on the end device.
Furthermore, the PBX time is required to carry out functions such as
switching configurations as well as wake-ups.
During a power failure or PBX reset, the PBX time is lost. There are several
ways to update it:
•
Manually
•
Take from PC
•
Via the network
•
Using the buffered real-time clock – saves the time for approx. two
hours in the case of a power outage.
•
Via ISDN/external S
Note: The switch to/from daylight savings is done automatically for the
PBX time.
Proceed as follows for configuration:
– Using the Configuration Manager (page Administration > Date/
Time of the PBX)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
port (optional, see Technical Data in Manual)
0
Functions, Uses, Concepts
PBX Time
41
Advertisement
Table of Contents
