Wall-Mounting The Pbx - Auerswald COMpact 5000 Operation Manual

Important: Do not remove the covers of the power supply unit and the base
circuit board. They are a protection against accidental contact with hazardous
voltages and guide the modules. Make sure that any repairs requiring the
casing cover to be removed are carried out by the manufacturer.
A Locks

Wall-Mounting the PBX

Requirements:
• Tools and material:
– Drill and screw driver
– The drilling template (see www.auerswald.de/service)
– The screws and dowels included in the scope of delivery
• Connections in the immediate vicinity of the installation site:
– Freely accessible Schuko socket
– Wall socket or NT provided by the network provider; if the wall socket/NT is relatively far
away from the PBX, permanent cabling must first be laid between the devices
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Installation and Commissioning
Preparation (COMpact 5000)
Wall-Mounting the PBX
63