Creating Switching Times For Switching The Wake-Up Announcement - Auerswald COMpact 3000 analog Operating Manual

1. Pick up the receiver.
2. Dial ##8.
3. Enter the sub-admin PIN.
4. Dial one of the following character strings:
*5521#: Deletes wake-up announcement number one.
*5522#: Deletes wake-up announcement number two.
*5523#: Deletes wake-up announcement number three.

Creating Switching Times for Switching the Wake-up Announcement

To switch wake-up announcements on and off depending on the time of day, different switching
times can be created.
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page FUNCTIONS > Configurations > Create switching times.
2. Select the desired day in the Day list field.
3. Enter the time in the line of the corresponding day in the Time entry field under
and mm. The following entries are possible:
Time in hh format: mm
00 to 23: Hours (hh)
00 to 59: Minutes (mm)
4. Select the desired wake-up announcement in the Wake-up announcement list field.
Further steps:
– Save your settings before you leave the page.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Creating Switching Times for Switching the Wake-up Announcement
Functions
Wake-up Functions
hh
331