Entering The Delay Time For Call Forwarding On No Reply For Subscribers - Auerswald COMpact 5000 Operation Manual

Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
1. Open the page Subscriber (scr.) > Properties > Authorisations.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the CF (groups) / Follow me check box.

Entering the Delay Time for Call Forwarding on No Reply for Subscribers

The delay time for call forwarding on no reply for subscribers indicates after how many seconds
a call is forwarded.
Proceed as follows:
• Separately for subscribers
• Separately for configurations
• Using the configuration manager
Note: As described in the following, the setting is also possible via profiles (...
> Profiles > Configuration > Configure > ...). If the check box Profile-
controlled settings has been selected, the property set in the right-hand
column will apply. For assignment of the profile, see chapter Settings >
Profiles.
1. Open the following page:
• For admin: Subscriber (scr.) > Properties > Reachability
• For user: Subscriber properties > Reachability.
2. In the list field at the top, select the subscriber in question by his name or number.
3. in the Delay time for CF on no reply entry field under Function > Subscriber
Settings, enter a value. Possible entries:
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Entering the Delay Time for Call Forwarding on No Reply for Subscribers
Functions
Call Forwarding
487