Call Forwarding For External Numbers - Auerswald COMmander 6000 Advanced Information

Functions, Uses, Concepts
Call Forwarding

Call Forwarding for External Numbers

When call forwarding for external numbers is used, calls made to an
external number (dialled by an external caller) are rerouted to other external
connections. In this way, these calls can be taken on another phone, for
example, on a mobile phone if no one can take the call internally.
Call forwarding for external numbers can be configured for the current
configuration or for the permanent configuration.
Notes:
If you want to also forward internal calls, use call forwarding for
subscribers or for groups instead of call forwarding for external numbers.
This also allows forwarding to internal phones.
The function can be configured with a voip exchange line via keypad
codes (depending on the provider) via the keypad of the phone. To do
this, you must first switch to internal if you have direct exchange access.
Proceed as follows for configuration:
• Switching authorisation for configuring features configured by the
network provider for the involved internal phones on.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Authorisations)
• Switching call forwarding on.
– Using the Configuration Manager (page Public switched tel.
networks > Call forwarding)
– Using a character string on the internal phone (see chapter Short
Reference > Call Forwarding for External Numbers)
– Using the menu/function key on a system phone (optional, see the
phone manual)
168
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018