Configuring and Operating Functions
LCR
Importing the LCR Configuration (Providers, Tariff Groups and Data)
Importing the LCR Configuration (Providers, Tariff Groups and Data)
Using special tariff calculators (e.g., Telefon-Sparbuch.de), you can calculate an LCR configu-
ration and import this into the PBX.
Caution: When importing configuration data, existing LCR data is deleted.
The import can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– A saved configuration file (*.xml, *.txt, also compressed *.gz) on a data storage medium (PC)
1. Open the page FUNCTIONS > Least Cost Routing > LCR data.
2. Click Browse (this text is dependent on the operating system used) under Import
LCR data.
A file selection dialog opens.
3. Select the LCR file to be imported and click Open (this text is dependent on the
operating system used).
The path and the file are displayed in the entry field.
4. Click Store in PBX.
The configuration data is imported and displayed in the corresponding tables (LCR
providers, LCR networks, LCR prefixes, LCR tables).
Creating Providers
The provider list provides space for up to 50 call-by-call providers.
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
257