Importing The Lcr Configuration (Providers, Tariff Groups And Data); Creating Providers - Auerswald COMpact 3000 analog Operating Manual

Importing the LCR Configuration (Providers, Tariff Groups and Data)

Using special tariff calculators (e.g., Telefon-Sparbuch.de), you can calculate an LCR configu-
ration and import this into the PBX.
Caution: When importing configuration data, existing LCR data is deleted.
The import can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– A saved configuration file (*.xml, *.txt, also compressed *.gz) on a data storage medium (PC)
1. Open the page FUNCTIONS > Least Cost Routing > LCR data.
2. Click Browse (this text is dependent on the browser used) under Import LCR data.
A file selection dialogue opens.
3. Select the LCR file to be imported and click Open (this text is dependent on the
operating system used).
The path and the file are displayed in the entry field.
4. Click Store in PBX.
The configuration data is imported and displayed in the corresponding tables (LCR
providers, LCR networks, LCR prefixes, LCR tables).

Creating Providers

The provider list provides space for up to 50 call-by-call providers.
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Importing the LCR Configuration (Providers, Tariff Groups and Data)
Functions
LCR
259