Parking The Call Internally (Call Parking) - Auerswald COMpact 5200 Advanced Information

Phoning
Transferring
The second and the third communication partner are now
connected with each other.
Then return to conducting an individual call with your first
communication partner.
• To connect the second and third communication partner and to
terminate the call with the first communication partner, hang up the
receiver.
The second and the third communication partner are now
connected with each other.
The first call will be signaled by the PBX if it was an external
call. The internal call is disconnected.
Note: If the third communication partner is not ready to be transferred to
the second communication partner, press the Flash key or the Query
key and dial 1. You will then get back to the normal query call.

Parking the Call Internally (Call Parking)

Call parking lets a caller in a waiting position be transferred so that the
desired communication partner can accept the call on another internal
phone.
Requirements:
• Authorisation Parçage d'appels assigned to the subscriber
276
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018