Copying A Function Key Assignment Into Other Comfortel Dect 900/900C Handsets - Auerswald COMmander 6000 Advanced Information

Settings – Subscriber (scr.)
COMfortel DECT
Copying a Function Key Assignment into Other COMfortel DECT
900/900C Handsets
The assignment of the
Handset can be copied into another mobile handset.
Proceed as follows:
• Using the Configuration Manager
Requirements:
• COMfortel DECT 900 Base connected to the internal S
• COMfortel DECT 900/900C Handsets
• Configured and assigned internal numbers for the COMfortel DECT
900/900C Handsets
1. Open the page Subscriber (scr.) > COMfortel DECT.
2. Select the DECT base in the list field under DECT base.
3. Click Copy keys in the line of the corresponding mobile handset.
A window for copying function keys opens.
4. Select the phone number of the source in the list field under Source
(number of the COMfortel DECT handset).
5. Select or clear the corresponding check boxes under Selection.
6. Under Target, select or clear the check box next to the internal numbers
for the mobile handsets into which the selected function key assign-
ments should be copied.
592
function key on a COMfortel DECT 900/900C
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
port
0