Important Information; Used Symbols And Signal Words; Safety Information - Auerswald COMpact 5000 Setup Manual

Important Information

Important Information
This section contains necessary information to operate your equipment safely. Before you
put the telephone into operation, it is absolutely necessary for you to read the safety informa-
tion described here and to make yourself familiar with the intended use of the device as well
as the technical data.

Used Symbols and Signal Words

Warning:
Warns of personal injury, for example, caused by hazardous electrical volt-
age.
Caution:
Warns of material damage.
Important:
Indicates possible application errors and conditions which, for example,
could cause function limitations or malfunctions during operation.
Note:
Marks complementary hints and notes.

Safety Information

Warning: Improper handling of the device can result in life-threatening
electrical shock and can damage or destroy the PBX.
Warning: Touching voltage-carrying conductors or telephone connections
may cause a life-threatening electric shock.
50
Only a qualified electrician may open the casing. If necessary, have an
authorised dealer commission the device.
Only a qualified electrician may perform installation work within an open
casing or service work using the buttons inside the casing. If necessary,
commission an authorised dealer to perform this work.
Read the instructions for the device and keep them for future reference.
Mount the PBX in the immediate vicinity of an earth wire (potential com-
pensation bar of the house installation or protective earth conductor).
Connect the earth connection of the PBX to the earth wire via a connect-
ing cable with at least 2.5 mm².
The PBX contains hazardous voltages, even outside of the power sup-
ply unit (for instance ringer voltages). Work on active, contact-hazard-
ous parts is only permitted after creating a voltage-free state.
COMpact 5000/R - Firmware Version 6.2 - Setup V01 03/2014