Configuring Maximum Credit For Call Allowance Accounts - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
Time and Call Allowance Account

Configuring Maximum Credit for Call Allowance Accounts

1. Pick up the receiver.
2. Dial ##8.
3. Enter the sub-admin or admin PIN.
4. Dial *74.
5. Enter the internal telephone number. The following entries are possible:
** and internal telephone number of the individual telephone (If you do not
use a direct exchange line access, omit the **.)
6. Dial *.
7. Enter the number of currency units (e.g., cents). The following entries are possible:
0 to 99998: Sets the call allowance account from 0 to 99998 currency units.
99999: Sets the call allowance account to unlimited.
8. Dial #.
Configuring Maximum Credit for Call Allowance Accounts
The maximum credit for call allowance accounts displays the highest amount that a call
allowance account may not exceed.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– External S port (only COMpact 3000 ISDN or COMpact ISDN module available as an
0
option)
Important: If using a VoIP account for external calls, the call allowance
account doesn't work.
– Configuration manager, opened with sufficient authorization
1. Open the page FUNCTIONS > Time and call allowance accounts > Settings.
314
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11