Functions
Call Through
Switching LCR for Call Through Calls On/Off
LCR for Call Through calls
Maximum duration for external Call Through calls
Exchange line settings for Call Through calls
2. Configure the call assignment. Doing this also specifies over which external phone
number the Call Through user calls the Call Through function and how many Call
Through calls can be made simultaneously.
3. Create the desired Call Through user. When you do this, enter the telephone number
of the Call Through user in the telephone book and enable Call Through authori-
sation.
Switching LCR for Call Through Calls On/Off
Switching this on/off can be done as follows:
• Via the configuration manager
Requirements:
– External S
port (only COMpact 3000 ISDN or COMpact ISDN module available as an option)
0
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page FUNCTIONS > Call Through.
2. Select or clear the LCR for Call Through calls check box under Settings.
Enables LCR for Call Through calls.
Disables LCR for Call Through calls.
Further steps:
– Save your settings before you leave the page.
Configuring the Maximum Duration for External Call Through Calls
Due to security reasons, external Call Through calls from the PBX have a time limit.
The configuration can be made as follows:
220
)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020