Entering The Delay Time For Baby Call - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

Entering the Delay Time for Baby Call

• For user: Subscriber Properties > Settings.

2. In the list field at the top, select the subscriber in question by his name or number.

3. Select or clear the Baby call (connection without dialling) check box.

Enables baby call.

Disables baby call. (No other action is required.)

4. If you have enabled baby call, enter the destination number in the Destination

number entry field under Baby call (connection without dialling). Possible entries:

External number

Short-code number

Internal number of the individual telephone

Internal number of the line group

Entering the Delay Time for Baby Call

The delay time for baby call determines the time in seconds, after which the destination number

is dialled automatically after picking up the receiver.

Proceed as follows:

• Using the configuration manager

1. Open the page Settings > Basic settings.

2. In the Delay time for baby/senior call entry field under SUBSCRIBER SETTINGS,

enter a value. Possible entries:

to 20: After 1 to 20 seconds, the destination number is dialled automatically

after picking up the receiver.

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Compact 5000r