Transfer and Callback
The PBX requires specifications for the transfer and the callback option for
external callers to be executed as desired.
Proceed as follows for configuration:
•
Configuring hook flash timing.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Analogue settings)
•
If necessary, switching the authorisation for external call transfer exter-
nally on.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Authorisations)
•
Configuring sufficient exchange line authorisations for the involved
internal subscribers.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Exchange line settings)
Note: The transferring subscriber needs a sufficient exchange line
authorisation for making external calls.
•
Configuring the maximum duration of transferred calls (external to
external).
– Using the Configuration Manager (page Subscriber (scr.) > All
subscribers)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Transfer and Callback
193