Switching The Callback Option On/Off - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Operating Functions
Exchange Line Transfer

Switching the Callback Option On/Off

( ). You do not have to carry out steps 1 and 2 described in the help topic
(opening the page + selecting the subscriber).
Further steps:
– Save your settings before you leave the page.
Switching the Callback Option On/Off
If the callback option is enabled, the requesting subscriber can trigger a callback after initiating
an external call.
Switching this on/off can be done as follows:
• Via the configuration manager
Requirements:
– System telephone COMfortel 1100/1500/2500/2500 AB/VoIP 2500 AB
– Internal S port (only available on the optional COMpact S
0
module) or internal VoIP channels (COMpact 3000 VoIP or acquired in the Upgrade Center
and released VoIP channels)
– Configuration manager, opened with sufficient authorization
– Expert view (click
1. Open the page FUNCTIONS > Transfer.
2. Select or clear the Callback option check box under Exchange line transfer.
Enables the callback option.
Disables the callback option.
Further steps:
– Save your settings before you leave the page.
242
)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
module or COMpact ISDN
0