Causes Of An Automatic Restart; Performing A Restart - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Service and Maintenance
Restart

Causes of an Automatic Restart

Causes of an Automatic Restart
An automatic restart executed after the following functions are carried out:
• An instant firmware update
• A factory settings restoration
• Saving Configuration Data for Automatically Loading from the Data Storage Medium in the
PBX
• Restoring Configuration Data from a Restoration Point
• A configuration reset
Note: Resetting the configuration requires only a limited restart. Only some
of the PBX functions are restarted. All calls are ended, and all data services
are closed. The Web server remains unaffected by this.

Performing a Restart

Performing this procedure can be carried out as follows:
• Via the configuration manager
• By pressing a button
Restarting Immediately or Delayed via the Configuration Manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page SERVICE > Firmware update/restart > Restart/firmware update.
2. In the list field under Restart of the PBX (Reboot), select one of the following
options:
immediately: The restart is carried out immediately.
1 to 60: After 1 to 60 minutes, the restart is automatically activated.
3. Click Restart under Restart of the PBX (Reboot).
The "Power" LED remains lit in green until all of the calls or at the latest until the end
of the waiting time.
The "Power" LED lights up/flashes in red and orange for up to two minutes.
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11
497