Configuring The Local Area Code - Auerswald COMpact 3000 analog Operating Manual

Settings
Identification

Configuring the Local Area Code

Further steps:
– Save your settings before you leave the page.
Configuring the Local Area Code
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page CONFIGURATION > External telephone numbers > Location.
Note: The configuration is also provided during the quick configuration using
the configuration wizard.
2. In the Local area code entry field, enter the local area code for the location of the
installation. The following entries are possible:
Digits (e.g.: 030 for Berlin)
Further steps:
– Save your settings before you leave the page.
350
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020