Configuring and Managing the PBX
Identification
Configuring the Local Area Code
Configuring the Local Area Code
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
1. Open the page CONFIGURATION > External telephone numbers > Location.
Note: The configuration is also provided during the quick configuration using
the configuration wizard.
2. In the Local area code entry field, enter the local area code for the location of the
installation. The following entries are possible:
Digits (e.g.: 030 for Berlin)
Further steps:
– Save your settings before you leave the page.
344
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11