Configuring The Country Prefix - Auerswald COMpact 3000 analog Operating Manual

12 digits (e.g.: for the IP address 192.168.0.2, enter 192168000002)
6. Dial #.
7. Hang up the receiver.
Querying the Gateway via an Internal Telephone
Requirements:
– CLIP-enabled telephone
– CLIP function enabled in the PBX (display of the telephone numbers)
1. Pick up the receiver.
2. Dial ##8*943#.
3. Hang up the receiver.
You will get a call. The gateway IP address is shown on the telephone display.

Configuring the Country Prefix

The configuration can be made as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page CONFIGURATION > External telephone numbers > Location.
Note: The configuration is also provided during the quick configuration using
the configuration wizard.
2. In the Country prefix entry field, enter the country prefix for the location of the instal-
lation. The following entries are possible:
Digits (e.g.: 0049 for Germany)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Settings
Identification
Configuring the Country Prefix
349