Isdn Connection; Configuring The Connection Type For The Isdn Connection - Auerswald COMpact 3000 analog Operating Manual

Settings

ISDN Connection

Configuring the Connection Type for the ISDN Connection

ISDN Connection
The COMpact 3000 ISDN provides an external S
PBX models.
Also the optionally available COMpact ISDN module provides an external S
The connection type that the network provider has provided on the NT needs to be configured
for this external S port.
0
Configuring the Connection Type for the ISDN Connection
The connection type that the network provider has provided for the NT needs to be configured
for the external S port.
0
The external S port can be operated in the following connection types:
0
• Point-to-Multipoint connection: ISDN point-to-multipoint connection (PTMP) with up to
ten multiple subscriber numbers (MSNs).
• Point-to-Point connection: ISDN point-to-point connection (PTP) with a PBX base
number and up to ten extension numbers (DDIs).
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– External S port (only COMpact 3000 ISDN or COMpact ISDN module available as an option)
0
– Configuration manager, opened with sufficient authorisation
– Expert view (click
– Configured prefixes (country prefix and local area code)
1. Open the page CONFIGURATION > External numbers.
2. In the list field at the top, select the ISDN connection in question.
A page opens for configuring the ISDN connection.
3. Open the page ISDN connection > Kind of connection.
Note: The configuration is also provided during the quick configuration using
the configuration wizard.
398
)
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
port on both the German and international
0
port.
0