Isdn Connection - Auerswald COMpact 5200 Advanced Information

Functions, Uses, Concepts

ISDN Connection

ISDN Connection
The existing ISDN connections can be connected to the external S
the PBX (optional, see Technical Data in the Instructions).
Proceed as follows for configuration:
• Configuring the connection type for the ISDN connection.
– Using the Configuration Manager (page Matériel > Configuration
du port)
• Configuring the PTMP connection and entering phone numbers.
– Using the Configuration Manager (on the following pages)
– Réseaux publics > Connexions RNIS > Liasion Point-Multi-Point
(PMP)
– Réseaux publics > Connexions RNIS > Liasion Point-Multi-Point
(PMP) > Configurer
• Configuring the PTP connection and entering phone numbers.
– Using the Configuration Manager (on the following pages)
– Réseaux publics > Connexions RNIS > Numéro Principal
d'abonnement/Faisceau (NDI)
– Réseaux publics > Connexions RNIS > Numéro Principal
d'abonnement/Faisceau (NDI) > Configurer
– Réseaux publics > Connexions RNIS > Numéros Directs (SDA)
en PTP
• Creating a call distribution for the ISDN connection.
– Using the Configuration Manager (page Réseaux publics > Achem-
inement des appels)
• If necessary, entering additional numbers for the PTP connection.
– Using the Configuration Manager (page Réseaux publics >
Connexions RNIS > Additional PBX base numbers)
98
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
ports of
0