Table of Contents
Advertisement
Introduction
Dear Customer!
In order to install your new PBX please contact an authorized dealer.
The case may only be opened by authorized personnel
tion work inside the open case as well as maintenance services
involving the keys inside the case are only allowed to be executed
1
by authorized personnel
.
Please pay attention to the General safety advises on
The PBX is designed for the connection to the digital telecommunica-
tions network ISDN (Point-to-Point connection and/or Point-to-
Multipoint connection). It enables the switching from the public commu-
nication net to different internal devices. The so-called terminals may be
system telephones (COMfort 1000, 1200 and 2000), ISDN devices as
well as analog devices.
The ISDN devices (e.g. ISDN telephones, ISDN PC controllers) should
be certified Euro-ISDN devices in order to guarantee a proper function-
ality. The analog subscriber connections enable the connection of most
pulse dialling, dual-tone multifrequency dialling and also of CLIP com-
patible units (telephone, fax machine, answering machine, modems).
Devices with dual-tone multifrequency dialling must have a FLASH key
(also called signal key R).
Thanks to functions like e.g. Short-Code Dialling, conference, splitting
and internal free of charge connections the PBX makes the daily tele-
phone communication simple, comfortable and time saving. Additional
to the telephoning the PBX offers numerous functions such as call
charge recording.
The PBX can be configured to your special personal requirements with
the configuration software COMset. Three further PC programs allow to
comfortable manage call charge data, Short-Code Dialling, call allow-
ances, wake-up calls, Music on Hold and the data for the automatic or
manual Least Cost Routing.
With help of the ISDN application package the functionality of the inte-
grated USB interface can be used to perform the most important fea-
tures of modern data communication (fax, answering machine, data
transfer, internet) in a professional way via PC.
Please observe the system requirements
The scope of functions described here is only completely usa-
ble with a professional installation and a correct configuration
of the PBX and the connected PC. We highly recommend to
consult your authorized dealer first.
Please ask your network operator about the availability of some ISDN
service attributes. Some of these functions may be available for an extra
fee.
There may be some incompatibility in combination with terminals and
devices of other vendors, that adversely influence the usability of func-
tions.
To fully utilize the scope of functions described here, the PBX system
must have the Software version 1.6A and the system telephone must
have the software version 2.0H or newer (you may receive information
about these versions via system telephone). If this is not the case,
please perform a firmware update of the respective device.
1
. Installa-
page
9.
Functional Description and Overview
(page
30).
1. Authorized personnel: These are persons that are trained for this purpose (e.g.
certified electricians). They must have the necessary knowledge about the
work in an area with potentially hazardous voltages. They must also have the
knowledge about the latest electrical safety standards and requirements.
Extent of Supply
1 COMpact 4410/2206 USB in the basic unit.
1 ISDN connection cable.
1 USB connection cable.
PC software:
For Windows 95/98/Me/2000/XP and Windows NT4.0 (with Service
Pack 3 or better), if you use the USB interface Windows 98 SE/Me/
2000/XP only.
manual set, consisting of:
1 installation and configuration manual for the administrator,
1 operation manual for the user and 1 CAPI/TAPI user manual.
installation material: screws and plugs.
Functions and Features of the basic Unit
Connecting possibilities for 6 analog subscribers (COMpact 2206
USB) or 10 analog subscribers (COMpact 4410 USB) and 1 system
display SD-420 (Auerswald accessory).
1 external S
port.
0
1 internal S
port.
0
Free configurable telephone numbers (10-59/100-599) for the inter-
nal subscribers/groups.
Charge control by 6 different classes of service, blocking numbers,
release numbers and special Short-Code Dialling authorization as
well as by setting of a call allowance account.
Watching the charging information via PC or via telephone (AOCE
or AOCD necessary). Metering pulse for analog telephones.
Call data management via PC software. Recording of 3000 call data
entries in a power failure proof call data memory.
Selection of the telephone number presented to the caller or the
person you called.
Dialling assistance by a power failure proof Short-Code Dialling
memory or setting of direct public exchange telephones.
Wake-up and timer functions via internal clock. Automatic setting of
summer/winter time.
Music on Hold, 7 internal or external melodies via audio input, pre-
recorded announcement text can be activated.
Music on Hold downloadable as a .wav-data file into the PBX
(COMpact 4410 USB only).
Text before answering and alarm announcement: Text is storable in
the PBX (COMpact 4410 USB only).
Announcement function via audio output.
Different ringer rhythms for the distinction of the calls.
Protection against unauthorized programming/telephoning with
passwords and programming protection.
Room monitoring and programming of the Call Forwarding from
external telephones.
Introduction
7
Hide quick links:
Advertisement
Table of Contents
