Taking Over A Call (Pick-Up) - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony

Hide thumbs Also See for COMmander 6000:

Table of Contents

Incoming Calls

You are connected with the caller.

Taking over a Call (Pick-up)

Using Pick-up, you can take a call on your own phone that was originally

sent to another internal phone.

Proceed as follows:

Using a character string on the internal phone

Using the menu/function key on a system phone (optional, see the

phone manual)

Requirements:

Authorisation Pick-up assigned to the subscriber

To pick up an external call: Exchange line authorisation assigned to

the subscriber for incoming calls (International, National, City or only

incoming, with emergency call)

If an internal phone rings in your proximity, proceed as follows:

1. Pick up the receiver of your phone.

Note: During an existing call press the Flash key or the Query key.

2. Dial ##06.

3. Enter the internal number of the phone that is ringing. Possible entries:

COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Commander 6000r