Creating Default Networks Based On A Provider Area Code - Auerswald COMpact 3000 analog Operating Manual

Functions
LCR

Creating Default Networks Based on a Provider Area Code

1. Open the page FUNCTIONS > Least Cost Routing > LCR providers.
2. Enter a name in the Name entry field. The following entries are possible:
Up to 16 digits
Digits and characters
3. In the Provider area code entry field, enter the provider area code without an
exchange line access number. The following entries are possible:
Up to 20 digits
Digits
4. Click .
5. Repeat step 2 to 4 to create additional entries.
Further steps:
– Save your settings before you leave the page.
– Create the networks for the tariff groups.
– Create for the networks the corresponding prefixes to complete the tariff groups.
– Enter the tariff information in the LCR tables.
Creating Default Networks Based on a Provider Area Code
The tariff groups City, Region, National and International can automatically be created based
on the local area code. They include the data for the LCR networks and the corresponding
LCR prefixes.
Caution: When networks are automatically created, the existing LCR data
are deleted.
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page FUNCTIONS > Least Cost Routing > LCR networks.
260
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020