Initiating Targeted VoIP Access
An external call can be initiated via a specific VoIP account using targeted
VoIP access point.
The Internet service provider's network can only be accessed via targeted
VoIP access, e.g., when querying the mailbox.
Proceed as follows:
•
Using a character string on the internal phone
•
Using the menu/function key on a system phone (optional, see the
phone manual)
1. Pick up the receiver.
2. Enter the account number. Possible entries:
Internal number of the VoIP account
Direct exchange line phone and Automatic exchange line request:
with preceding **)
3. Enter an external number. Possible entries:
External number
preceding exchange line access number)
Note: In any case, the external number must be dialled with the corre-
sponding local area code, even if it is your own local area code. The
special numbers provided by the VoIP provider for checking one's
account status or dialling usually do not include a local area code.
The subscriber is called.
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
(for exchange line request type Internal phone: with
(for exchange line request types
Phoning
Outgoing Calls
247