Table of Contents
Advertisement
Transmission of the Display Name
Transmission of the display name forces the internally called phone to
display the name entered in the phone itself instead of the name entered in
the PBX. It makes sense to use this function in combination with special
calling systems such as the GIRA calling system 834 plus, for example. It
permits the transmission of text messages (entered as display name) during
an internal call.
Note:
In combination with the alarm device function (see chapter Functions,
Uses, Concepts > Alarm Device), text messages can be sent and signal-
lised accordingly.
For text messages without a simultaneous call, you can send text
messages via SIP (RFC 3428) (see chapter Functions, Uses, Concepts
> Text Messages (Instant Messaging)).
Proceed as follows for configuration:
•
Switching the transmission of the display name on.
– Using the Configuration Manager (page Subscriber (scr.) >
Properties > Settings)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
Functions, Uses, Concepts
Transmission of the Display Name
187
Advertisement
Table of Contents
