Initiating Priority Call For Do-Not-Disturb - Auerswald COMmander 6000 Advanced Information

Pbx for internet/isdn telephony
Hide thumbs Also See for COMmander 6000:
Table of Contents

Advertisement

Phoning
Unsuccessful Outgoing Calls
Note: A callback will be stored in the public exchange for a duration of
up to 45 minutes. If the called subscriber has not used the connection
until then, the callback will automatically be deleted.
4. Pick up the receiver to the make the callback.
Note: If you do not pick up the receiver within the 20 seconds during
which the public exchange calls you, the callback request will be deleted.
If you pick up the receiver, the subscriber will be called.

Initiating Priority Call for Do-Not-Disturb

If, for example, a person must absolutely be reached in an emergency
despite the do-not-disturb function, the do-not-disturb function can be
circumvented by a priority call from an internal phone.
If the internal phone you are trying to call is busy because it is set to do-not-
disturb, proceed as follows:
Wait ten seconds.
The subscriber is now called.
264
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018

Advertisement

Table of Contents
loading

This manual is also suitable for:

Commander 6000r

Table of Contents