Short Reference
Identification (IPv4 Address, Subnet Mask, Gateway, DHCP Client)
Identification (IPv4 Address, Subnet
Mask, Gateway, DHCP Client)
Note: Only IPv4 addresses can be entered using a character string on
the phone. IPv6 addresses must be entered using the Configuration
Manager of the PBX.
Configuring the IPv4 Address of the PBX (on an Internal Phone)
## 8
PIN
* 931 *
PIN
E
Querying the IPv4 Address of the PBX (on an Internal Phone)
## 8 * 941 #
Additional infor-
mation
Configuring the Subnet Mask of the PBX (on an Internal Phone)
## 8
PIN
* 932 *
PIN
E
316
E
#
Admin or sub-admin PIN
IPv4 address of the PBX (12 digits)
Display of the IPv4 address of the PBX on the phone
display after callback by the PBX
E
#
Admin or sub-admin PIN
Subnet mask (12 digits)
COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018