Clip Texts; Configuring Clip Texts - Auerswald COMpact 3000 analog Operating Manual

CLIP Texts

CLIP texts are displayed on the system telephones and/or the CLIP-capable analogue
telephones for specific calls (e.g., for wake-up calls).

Configuring CLIP Texts

CLIP texts can configured for the following calls and functions:
• Callbacks: The configured CLIP text is displayed on analogue telephones during a callback
(on busy or on no reply).
• CCBS callbacks: The configured CLIP text is displayed on system telephones during a
callback on busy.
• CCNR callbacks: The configured CLIP text is displayed on system telephones during a
callback on no reply.
• Wake-up calls: The configured CLIP text is displayed on analogue telephones during a
wake-up call.
• Exchange line reservation: The configured CLIP text is displayed on analogue telephones
during a call to signal that a line that was previously busy has become available.
• TAPI: The configured CLIP text is displayed on analogue telephones during a call that
signals the LAN-TAPI function.
The configuration can be made as follows:
• Via the configuration manager
Requirements:
– System telephone or an analogue telephone with CLIP information alpha-numerically
– Configuration manager, opened with sufficient authorisation
– Expert view (click
– CLIP info enabled for analogue subscribers
– Telephone number display (CLIP): CLIP info and Extended CLIP info enabled for the
subscriber
1. Open the page FUNCTIONS > CLIP texts.
2. Enter the CLIP texts in the corresponding entry fields under Callback, Wake-up call,
Exchange line reservation and TAPI. The following entries are possible:
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
)
Functions
CLIP Texts
Configuring CLIP Texts
225