Presenting The Tones; Configuring The Internal Dial Tone - Auerswald COMpact 3000 analog Operating Manual

Presenting the Tones

The tones are signaled as follows:

Configuring the Internal Dial Tone

The user hears the internal dial tone after picking up the receiver or after pressing the FLASH
or query key if a line is available. It is then possible to dial a telephone number.
The configuration can be made as follows:
• Separately for subscribers
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Expert view (click
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
Signalization by tones.
2. In the list field at the top, select the subscriber in question by his name or number.
3. In the Internal dial tone list field, select one of the following options:
1 x long: Continuous tone
3 x short: 3 Double tones, approx. 1 second pause, ...
Special tone: Pulsating tone
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
)
Settings
Tones
Presenting the Tones
483