Presenting The Tones; Configuring The Internal Dial Tone - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Configuring and Managing the PBX
Tones

Presenting the Tones

Presenting the Tones
The tones are signaled as follows:

Configuring the Internal Dial Tone

The user hears the internal dial tone after picking up the receiver or after pressing the FLASH
or query key if a line is available. It is then possible to dial a telephone number.
The configuration can be made as follows:
• Separately for subscribers
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorization
– Expert view (click
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
Signalization by tones.
2. In the list field at the top, select the subscriber in question by his name or number.
3. In the Internal dial tone list field, select one of the following options:
1 x long: 1 Long tone (1 second), 4 second pause, ...
3 x short: 3 Double tones, approx. 1 second pause, ...
Special tone: Pulsating tone
468
)
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11