Call Restrictor (Incoming) - Robinson Numbers; Switching The Call Restrictor (Incoming) On/Off - Auerswald COMpact 3000 analog Operating Manual

Call Restrictor (Incoming) – Robinson Numbers
If there are certain persons who you absolutely do not want to call you or if you do not want
callers to call an extension, their external phone numbers and/or all anonymous callers can be
assigned to a call restrictor for incoming calls. The call restrictor which applies to all subscribers
can be enabled on your own telephone as needed. If the call restrictor is enabled, a caller, who
transmitted one of the assigned telephone numbers, is rejected.

Switching the Call Restrictor (Incoming) On/Off

Switching this on/off can be done as follows:
• Separately for subscribers
• Separately for configurations
• Via the configuration manager
• Using a character string on the internal telephone
• Using the menu/function key on a system telephone (optional, see the telephone manual)
Switching the Call Restrictor (Incoming) On/Off via the Configuration Manager
Requirements:
– Configuration manager, opened with sufficient authorisation
– Configured call restrictor
1. Open the page PROPERTIES > Internal subscribers > Subscriber properties >
User settings.
2. In the list field at the top, select the subscriber in question by his name or number.
3. Select or clear the Call restrictor (incoming) check box.
Enables the call restrictor.
Disables the call restrictor. (No other action is required.)
4. Select the call restrictor you want in the Call restrictor (incoming) list field.
COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020
Call Restrictor (Incoming) – Robinson Numbers
Switching the Call Restrictor (Incoming) On/Off
Functions
301