Table of Contents
Advertisement
busy or nobody takes the call or all the members are logged out - the
call will be forwarded perhaps even to different destination numbers.
If an „CF unconditional" is activated in addition to a „CF on busy" and/or
a „CF on no Reply", only the „CF unconditional" is used that means the
whole calls will be forwarded to the destination of the „CF uncondi-
tional". In this case the other forwarding settings are ignored, but are still
active in the background. As soon as the „CF unconditional" is switched
off, the other still active forwarding settings are used again.
To activate the group Call Forwarding there must be an authorization
configured for the telephone via configuration program COMset.
Besides this the subscriber that configures the Call Forwarding must be
a member of the group to be forwarded.
If you set an internal telephone as forwarding destination, this one will
need to have at least the partial exchange line access for forwarded
external calls.
Log in/out as a Member of a Group if you are only Member of one Group
b
7 Q
telephone of the
public
group member
password
Log in/out as a Member of a Group if you are Member of several Groups
b
7 Q 40 S G
telephone of the
public
group member
password
b
7 Q 41 S
telephone of the
public
group member
password
b
7 Q 42 S G
telephone of the
public
group member
password
40
inbound and outbound
41
or
inbound only
42
or
outbound only
internal number of the group
inbound and
1: log in,
(if you log in to several
outbound
0: log out
groups „outbound" will be
valid for the last group)
inbound
1: log in,
only
0: log out
or
internal number of the group
outbound
1: log in,
(if you log in to several
only
0: log out
groups „outbound" will be
valid for the last group)
Do not mix up the group Call Forwarding and the MSN/DDI Call For-
warding. You can only forward external calls to your mobile phone or
another external connection with an MSN/DDI Call Forwarding. A for-
warding of internal calls or to internal calls is not possible. So if you like
to prevent that internal calls are forwarded to your mobile phone, use
the MSN/DDI Call Forwarding (see
always reach Somebody when calling your external Number (MSN/DDI
Call Forwarding) on page
Only subscriber configured for a group with the configuration program
COMset, will be able to „log in" by telephone.
You can also log in/out comfortably with the help of the menu of the sys-
tem telephone COMfortel 1500/2500 and COMfort 1000/1200/2000
plus.
S #
1: log in,
0: log out
#
Log in/out inbound and outbound into a Group, log
G#
Log in/out inbound only into another Group, log out
internal number of the
group and hash
#
hash for all groups
(in which the subscriber is a
member)
#
Special Functions for Business Applications
chapter External Callers should
28).
Log in/out inbound and outbound into a Group
Log in/out inbound only into a Group
Log in/out outbound only into a Group
Log in/out inbound only into all Groups,
Log in/out outbound only into another Group, log
53
out of a Group
of a Group
log out of all Group
out of a Group
Advertisement
Table of Contents
