LCR
LCR (Least Cost Routing) is a function of the PBX that enables the
subscriber to automatically make calls using the most cost-effective phone
service provider. The PBX determines the phone service provider to be
used by the dialled phone number and the configured tariff tables.
Note:
Automatic LCR is not carried out for the entered emergency numbers
(Réseaux publics > Appels d'urgence).
If a call is initiated via a targeted exchange line access, automatic LCR
is not carried out.
Requirements:
•
Support of dial-around service by the network provider
Proceed as follows for configuration:
•
Switching LCR at the external connection on.
– Using the Configuration Manager (on the following pages)
– Réseaux publics > Connexions RNIS > Liasion Point-Multi-Point
(PMP)
– Réseaux publics > Connexions RNIS > Numéro Principal
d'abonnement/Faisceau (NDI) > Configurer
– Réseaux publics > Connexions analogiques
– Réseaux publics > Voix sur IP (VoIP) > Comptes > Configurer
•
Selecting the subscribers on which automatic LCR should be carried
out.
– Using the Configuration Manager (page Routage > Soft-LCR 4.0 >
Abonnés LCR)
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Functions, Uses, Concepts
LCR
127