ADTRAN AOS Version R10.1.0 Command Reference Manual page 2036

Command Reference Guide
spanning-tree bpduguard
Use the spanning-tree bpduguard command to block bridge protocol data units (BPDUs) from being
received on this interface. To return to the default value, use the no form of this command. Variations of
this command include:
spanning-tree bpduguard disable
spanning-tree bpduguard enable
Syntax Description
disable
enable
Default Values
By default, this command is set to disable.
Command History
Release 5.1
Release 8.1
Usage Examples
The following example enables the bpduguard on the interface:
(config)#interface atm 1.1
(config-atm 1.1)#spanning-tree bpduguard enable
60000CRG0-35E
Disables the BPDU block.
Enables the BPDU block.
Command was introduced.
Asynchronous transfer mode (ATM) subinterface was added.
Copyright © 2012 ADTRAN, Inc.
ATM Subinterface Command Set
2036