ADTRAN AOS Version R10.1.0 Command Reference Manual page 2028

Command Reference Guide
oam-pvc managed
Use the oam-pvc managed command to enable end-to-end F5 operations, administration, and
maintenance (OAM) loopback cell generation and OAM management for an asynchronous transfer mode
(ATM) interface. Use the no form of this command to disable generation of OAM loopback cells.
Variations of this command include:
oam-pvc managed
oam-pvc managed <value>
Syntax Description
<value>
Default Values
By default, the frequency is 1 second.
Command History
Release 8.1
Usage Examples
The following example enables OAM loopback cell generation with a frequency of 5 seconds:
(config)#interface atm 1.1
(config-atm 1.1)#oam-pvc managed 5
60000CRG0-35E
Optional. Specifies the time delay between transmitting OAM loopback
cells. Range is 0 to 600 seconds.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
ATM Subinterface Command Set
2028