ADTRAN AOS Version R10.1.0 Command Reference Manual page 2029

Command Reference Guide
packet-capture <name>
Use the packet-capture command to apply a previously configured packet capture instance to the
interface. Use the no form of this command to remove the packet capture instance.
Syntax Description
<name>
Default Values
By default, no packet capture instances are configured or applied to the interface.
Command History
Release R10.1.0
Functional Notes
The AOS packet capture feature is used with network monitoring to effectively capture data packets as
they traverse the network. For more information about packet capturing, its uses, and its implementation in
AOS, refer to the configuration guide Configuring Packet Capture in AOS, available online at
https://supportforums.adtran.com
Usage Examples
The following example applies the previously configured packet capture 1CAPTURE to the interface:
(config)#interface atm 1.1
(config-atm 1.1)#packet-capture 1CAPTURE
60000CRG0-35E
Specifies the name of the packet capture instance to apply to the interface.
Command was introduced.
(article number 3528).
Copyright © 2012 ADTRAN, Inc.
ATM Subinterface Command Set
2029