ADTRAN AOS Version R10.1.0 Command Reference Manual page 2030

Command Reference Guide
pvc <VPI/VCI>
Use the pvc command to select the asynchronous transfer mode (ATM) virtual link for this subinterface.
Use the no form of this command to remove the link.
Syntax Description
<VPI/VCI>
Default Values
No default values are necessary for this command.
Command History
Release 8.1
Usage Examples
The following example sets the VPI to 8 and the VCI to 35:
(config)#interface atm 1.1
(config-atm 1.1)#pvc 8/35
60000CRG0-35E
Specifies the ATM network virtual path identifier (VPI) for this permanent
virtual circuit (PVC). The VPI value range is 0 to 255, and the virtual
channel identifier (VCI) value range is 32 to 65535.
Command was introduced.
Copyright © 2012 ADTRAN, Inc.
ATM Subinterface Command Set
2030