Closing The Casing - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

Installation and Commissioning

Preparation (COMpact 5000)

Closing the Casing

Requirements:

• After installation, cables carefully reinserted into the cable space

Note: The connections for the first commissioning (connection to a PC/

network and, if necessary, connection of a few end devices) must be made

before the casing is closed. Alternatively, you can prepare them by laying a

connecting cable that leads out of the casing.

1. Place the upper edge of the cover onto the top of the casing.

2. Press the lower edge of the cover against the casing until it clicks into place.

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Compact 5000r