Closing The Casing - Auerswald COMmander Basic.2 Installation And Commissioning Instructions

Fig. 21: Earthing terminal
on the main circuit board
Requirements
– After installation, cables carefully reinserted into the
cable space
Note: This mounting frame is equipped with fastening
hooks. See Fig. 22.
Fig. 22: Fastening hooks
Steps to Take
1.
Place the casing cover approx. 15 cm towards the top
by sliding it straight onto the casing. See
2.
Finally, pull the cover vertically downwards until it is in
the correct position.
Preparation (Casing Variants for Wall Mounting)

Closing the Casing

Fig. 23.
Fig. 23: Closing the casing
1.
2.
31