Table of Contents
Advertisement
Important Information
Product Details
Installation
Switch Input
The PBX can only be extended with switch inputs by connecting the corresponding acces-
sories. See Ethernet port and internal analogue port.
Announcement Output
The PBX can only be extended with announcement outputs by connecting the corresponding
accessories. See Ethernet port and internal analogue port.
Installation
The PBXs are intended to be operated in closed rooms. In addition, all of the devices
connected to the system must be located inside the building.
The PBXs enable you to connect some devices directly, inasmuch as they are close enough to
the PBX. The distance depends on the length of the equipment connection cables up to a
maximum of 10 m.
If no suitable connection sockets are available or are too far away, you must lay the installation
cable permanently.
Warning: Power surges, which can occur during electrical storms, can
cause life-threatening electric shocks.
• Hire a qualified electrician to lay the cables within the building – including
• Do not use the a/b ports to connect remote extensions.
Important: Improper use can cause, for example, functional restrictions or
interference, the destruction of the device or, in a worst-case scenario,
personal injury.
• Only connect equipment that is compatible with the proper use of the
Note:
The terminal clamps on the modules are removable to facilitate installation.
Accessories and service parts can be bought at specialised stores or in the
Internet shop distriCOM (see www.districom.de). Delivery is provided only
in Germany and for specialised dealers also to Austria.
44
the cable to the door terminal.
PBX.
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Advertisement
Table of Contents
