Transfer; Options For Transferring A Call - Auerswald COMpact 3000 analog Installation, Operation And Configuration Instructions

Telephoning

Transfer

Options for Transferring a Call

Transfer
A communication partner can be transferred or connected to an internal or external subscriber.
Options for Transferring a Call
During an existing call, the following options are available for transferring a call:
Transferring with Announcement
In order to transfer a call, first initiate a query call, announce the call and then connect both
communication partners.
Transferring without Announcement
If you would like to transfer an external communication partner to another internal subscriber,
you do not have to wait until the subscriber being called via the query call accepts the call; you
can hang up the receiver while this call is being made. The internal subscriber will continue to
be called.
Placing External Communication Partner in Waiting Loop
If the internal subscriber to which you would like to transfer an external communication partner
is busy, you can place the external communication partner in the waiting loop of this subscriber.
Calling a Third Subscriber and Transferring to an Active Communication Partner
Assuming that you have gained an additional communication partner from a call, e. g. from
accepting a call signaled by call waiting, and this second communication partner would like to
be transferred now to somebody else. You can now initiate a third call that connects the second
and third communication partners with each other and then continue telephoning with your first
communication partner.
Additional Options
– Parking the Call Internally (page 207)
114
COMpact 3000 analog/ISDN/VoIP - Firmware Version 4.0 - Version of the Manual 03 02/11