Using A Filter; Creating Filters - Auerswald COMpact 5000 Operation Manual

Pbx for analogue/isdn/internet telephony

Hide thumbs Also See for COMpact 5000:

Table of Contents

Address Books and Lists

Using a Filter

Using the filter can be carried out as follows:

• Using the configuration manager

1. Open the following page:

• For admin: User data > Call data > Call data list

• For user: Call data list.

2. In the SELECTED FILTER list field, select one of the available options.

Note: On the page User data > Call data > Filter you can also create user-

defined filters which can then be selected here.

A filter prescribes the criteria after which the call data will be filtered.

Proceed as follows:

• Using the configuration manager

1. Open the following page:

• For admin: User data > Call data > Filter

• For user: Filter.

3. Enter the desired name in the Filter name entry field.

4. In the Based on list field, select a template from all filters created so far.

COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016

Compact 5000r