Ip Rip Send Version - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip rip send version

ip rip send version { 1 | 2 | 1 2 | 2 1 | off }
Syntax
no ip rip send version
Command introduced before JUNOSe Release 7.1.0.
Release Information
Restricts the RIP version that the router can send on an interface. The no version
Description
sets the interface back to the default value, sending only RIP version 1.
Options
Interface Configuration, Subinterface Configuration
Mode
928
ip rip send version
1 Specifies RIP version 1 only
2 Specifies RIP version 2 only
1 2 Specifies RIP version 1 and version 2
2 1 Specifies RIP version 2 and version 1
off Turns reception off