L2Tp Policy - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

l2tp policy

l2tp policy { input | output } policyName [ statistics
Syntax
{ enabled | disabled } [ merge ]
no l2tp policy { input | output }
Command introduced before JUNOSe Release 7.1.0.
Release Information
merge keyword added in JUNOSe Release 7.2.0.
Assigns an L2TP policy list to a profile, which then assigns the policy to an interface.
Description
If you enter the l2tp policy command and the policy list does not exist, the router
creates a policy list with no rules, the default. Attaching this policy list to an interface
filters all packets on that interface. You must specify the input or output keyword
to assign the policy list to the ingress or egress of the interface. The no version
removes the association between a policy list and a profile.
Options
Profile Configuration
Mode
Related Topics
1180
l2tp policy
input Applies policy to data arriving at the interface
output Applies policy to data leaving the interface
policyName Name of the policy; maximum of 40 characters
statistics Enables or disables collection of policy routing statistics
enabled Enables collection of policy routing statistics
disabled Disables collection of policy routing statistics
merge Enables merging of multiple policies to form a single policy
Setting a Statistics Baseline for Policies