Ip Igmp Ssm-Map Enable - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

Chapter 10: I Commands

ip igmp ssm-map enable

[ no ] ip igmp ssm-map enable
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Enables SSM mapping on the router. SSM mapping statically assigns sources to
Description
IGMPv1 and IGMPv2 groups. You must use SSM mapping for IGMPv1 and IGMPv2
hosts to interoperate with PIM SSM. SSM mapping allows the router to use a statically
configured list to translate (*,G) memberships to (S,G) memberships. The no version
disables the SSM map.
Privileged Exec, User Exec
Mode
835
ip igmp ssm-map enable