Ipv6 Mld Version - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

ipv6 mld version

ipv6 mld version { 1 | 2 | passive }
Syntax
no ipv6 mld version
Command introduced before JUNOSe Release 7.1.0.
Release Information
Sets the MLD version for the interface. The no version restores the default value,
Description
MLDv1.
Options
Interface Configuration, Profile Configuration
Mode
1 Sets MLD version 1
2 Sets MLD version 2
passive Configures a mapped OIF as a passive interface with only
multicast-data-forwarding capability
Chapter 10: I Commands
1057
ipv6 mld version