Ip Mirror - Juniper JUNOSE 11.1.X - COMMAND REFERENCE A TO M 4-9-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide A to M

ip mirror

ip mirror mirrorInterfaceType mirrorInterfaceSpecifier
Syntax
[ analyzerInterfaceType analyzerInterfaceSpecifier [ next-hop nextHop ] ]
no ip mirror mirrorInterfaceType mirrorInterfaceSpecifier
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the specified interface to mirror all IP ingress and egress traffic, and
Description
directs the mirrored traffic to an analyzer interface. The no version disables mirroring
on the interface.
NOTE: This command is deprecated and might be removed completely in a future
release. The function provided by this command has been replaced by the updated
packet mirroring feature and the ip policy command used with the secure-input
and secure-output keywords.
Options
Global Configuration
Mode
Related Topics
854
ip mirror
mirrorInterfaceType—Interface type; see Interface Types and Specifiers on page 5
mirrorInterfaceSpecifier—Particular interface that performs the interface mirroring
function; see Interface Types and Specifiers on page 5
analyzerInterfaceType Interface type
analyzerInterfaceSpecifier Particular interface used as the analyzer interface; if
omitted, the virtual router's default analyzer interface is used
nextHop Next-hop IP address to the remote analyzer host; required if the
analyzer interface is a shared medium, such as Ethernet
Configuring CLI-Based Mirroring